Air Lift Company

Launch of complete SlamAir line with new F-150 kit release

New Product Release PDF (652k PDF) | Product Photo (303k JPG)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

SlamAIR Plus LANSING, MI • May 1, 2008 —Air Lift Company announced today the launch of its complete line of SlamAir products with the release of a new SlamAir air spring kit for lowered 2004-2009 Ford F-150 models. Air Lift SlamAir products now fit popular Chevrolet, Dodge, Ford, GMC and Toyota vehicles — more makes than any other company in the lowered vehicle market.

The new F-150 SlamAir kit is designed for trucks which have been lowered two to six inches with a shackle, leaf spring or flipped axle drop. This kit comes with Air Lift’s exclusive alignment tool and installs in one to three hours, depending on how the truck was lowered. SlamAir kits supplement a lowered truck’s leaf springs providing adjustable spring rate for ride comfort, safety and variable loads.

This new SlamAir air spring kit — part No. 59210 — is available for immediate purchase and comes standard with a limited lifetime warranty.

This new air spring suspension kit will be added to EasyStreet’s extensive line of sport vehicle systems and will eventually be rolled into all future applications.

Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. For more information, contact Air Lift Company by calling (800) 248-0892, or on the Web at http://www.airliftcompany.com.

- END -

New, improved McPherson strut and upper mount now available from EasyStreet

Product Photo (349k JPG)
Contact: Corey Rosser, (800) 248-0892, ext. 227 or coreyrosser@airliftcompany.com

LANSING, MI • May 1, 2008 —Air Lift Company and EasyStreet announced today the release of their combined Generation II McPherson strut and upper mount. The unique modular design can be applied to many different vehicle types and offers a smoother, more comfortable ride with improved noise isolation and durability.

The innovative Generation II strut accomplishes these enhancements with improved internal valving, a new triple tube design and new internal bearings. The triple tube design gives a quieter ride with reduced friction and improved internal sealing. The redesigned upper mount integrates a low profile jounce bouncer which increases the suspension travel range and allows the vehicle to be as low as possible.

EasyStreet kits enhance performance handling while gaining the appeal of a lowered vehicle. The kits are engineered for your specific vehicle and are 100 percent bolt-on — no welding is required — allowing for an easy installation.

This new air spring suspension kit will be added to EasyStreet’s extensive line of sport vehicle systems and will eventually be rolled into all future applications.

EasyStreet is a division of Air Lift Company that features air suspension solutions for hot rods, sport compacts, sport trucks, custom cars and other lowered performance vehicles. Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. For more information contact EasyStreet by calling (800) 248-0892, or on the Web at http://easystreetair.com.

- END -

EasyStreet unveils new Dominator series air springs

Contact: Corey Rosser, (800) 248-0892, ext. 227 or coreyrosser@airliftcompany.com

D2600 and D2500 - Single Port LANSING, MI • May 1, 2008 —Air Lift Company and EasyStreet announced today the release of their new Dominator series air springs — the D2500 and the D2600.

The Dominator line of air springs provide the ultimate in air spring performance with more lift, higher pressure, and a softer ride. The D2500 features a maximum 600 PSI restrained, a 7.7" stroke and a load range of 294-2096 lbs. The D2600 air spring also features a maximum 600 PSI restrained, a 9.7" usable stroke, and a load range of 349-3055 lbs. Both the D2500 and D2600 series come with single and dual port options and are the most competitively priced bags of their style in the industry.

D2600 and D2500 - Dual Port The D2500 (part Nos. 58343 - single port, and 58352 - dual port) and the D2600 (part Nos. 58616 - single port, and 58623 – dual port) are now available for immediate purchase.

- END -

Air Lift t-shirts now available!

Contact: Corey Rosser, (800) 248-0892, ext. 227 or coreyrosser@airliftcompany.com

LANSING, MI • Apr. 8, 2008 —Want to sport the logo of your favorite air suspension company? Air Lift t-shirts are now available through our EasyStreet website. Made of 100% high quality cotton, the shirts come in sizes small, medium, large, x-large, xx-large, and xxx-large. The t-shirts are available in black with the classic Air Lift logo in white ink. Check the website for pricing and ordering information.

- END -

New wireless control system available - WirelessAIR

New Product Release PDF (473k PDF) | Product Photo (204k JPG)
Contact: Aaron Lundy, (800) 248-0892, ext. 249 or alundy@airliftcompany.com

LANSING, MI • Apr. 1, 2008 — Air Lift Company announced today the release of the new and innovative WirelessAIR (Advanced Integrated Remote) wireless control system. With no wires, and no air lines to the cab, WirelessAIR achieves a new level of user freedom with the easiest installation on the market.

The breakthrough control system includes a compressor, manifold, wiring harness, and wireless digital controller — everything you need in one kit. About the size of a garage door opener, the wireless controller, conveniently clips to a vehicle’s visor. For maximum flexibility, the system controls two air springs independently and can be used in or outside the vehicle, making it easy to make adjustments in full view of the vehicle. The compact, battery-powered unit also features advanced integrated diagnostic capabilities for increased safety and peace of mind. Two user-defined memory buttons are provided for frequently used settings. As an added safety measure, minimum air pressures are automatically maintained. The manifold is also weather resistant and waterproof up to 2 ft for maximum life expectancy.

Air Lift on board air systems are the most advanced in the industry and work with all brands of air springs. They come standard with a two year limited on board air control system warranty. The WirelessAIR control system (part No. 72000) is available for immediate purchase.

- END -

Breakthrough suspension solution announced - Lock-N-Lift universal air spring spacer system

New Product Release PDF (652k PDF) | Product Photo (382k JPG)
Contact: Aaron Lundy, (800) 248-0892, ext. 249 or alundy@airliftcompany.com

LANSING, MI • Apr. 1, 2008 — Air Lift Company announced today the release of a breakthrough suspension solution — the Lock-N-Lift universal air spring spacer system. Now you can keep the profile of a lift kit and add the benefit and support of air springs with one robust spacer system.

Lock-N-Lift's customizable modular snap and lock design works with all brands of air springs. Installed between the air spring and bracket, the universal spacers can be angled or not, taking the guess work out of installation. The spacers also provide reduced un-sprung mass (compared to steel or fabricated spacers) because they are molded from Zytlel — which is lighter and stronger than steel — making your ride smoother and more enjoyable. Conveniently shipped in modular 2” stackable heights, Lock-N-Lift spacers can be joined in multiple configurations for varying suspension solutions.

The Lock-N-Lift universal air spring spacer system (2" lift - part No. 52130, 4" lift - part No. 52140, 6" lift - part No. 52150) comes standard with a two year, no mileage restriction, limited warranty and is now available for immediate purchase. These systems do not include air springs.

- END -

New LoadLifter 5000 Kit for Ford F-250 & F-350

New Product Release PDF (230k PDF) | Product Photo (886k JPG)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

Loadlifter 5000 Kit LANSING, MI • Apr. 1, 2008 — Air Lift Company announced today the release of a new LoadLifter 5000 air spring suspension kit for the 2005 to 2008 Ford F-250 and F-350, two- and four-wheel-drive models. The kit is specially designed to fit models with fifth wheel hitch applications and can be installed on both single- and dual-rear-wheel vehicles. This kit is one of Air Lift's many no-drill applications featuring a bolt-on assembly easily installed between the vehicle’s frame and axle. The double bellow design provides brute strength capable of handling big loads with full-time load support up to 5,000 pounds, improving safety and ride quality.

LoadLifter 5000 is Air Lift’s toughest line of adjustable air helper springs. They are built like a tire with reinforced 2-ply fabric rubber bellows and ultra high strength Zytel® nylon end caps.

This new LoadLifter 5000 air spring suspension kit—part No. 57394—is available for immediate purchase. The kit comes standard with a limited lifetime warranty featuring no mileage restriction.

- END -

New SlamAir Kit for GMT 800 & GMT 900

New Product Release PDF (652k PDF) | Product Photo (303k JPG)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

LANSING, MI • Apr. 1, 2008 — Air Lift Company announced today the release of a new SlamAir Plus air spring kit for lowered 1999-2007 Chevrolet Silverado and GMC Sierra GMT 800 Classic models, and 2007 and later Chevrolet Silverado and GMC Sierra GMT 900 models.

This SlamAir Plus kit is designed for trucks which have been lowered four to six inches with a shackle, leaf spring or flipped axle drop. This kit comes with Air Lift’s exclusive alignment tool and installs in one to three hours, depending on how the truck was lowered. SlamAir kits supplement a lowered truck’s leaf springs providing adjustable spring rate for ride comfort, safety and variable loads.

This new SlamAir Plus air spring kit—part No. 59209—is available for immediate purchase and comes standard with a limited lifetime warranty.

- END -

New LoadLifter 5000 Kit for Ford F-450 Pickup

New Product Release PDF (123k PDF) | Product Photo (42k JPG)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

LANSING, MI • Mar. 4, 2008 — 57347 Air Lift Company announced today the release of a new LoadLifter 5000 air spring suspension kit for the 2008 Ford F-450 Pickup, two- and four-wheel-drive models.

This kit features no frame drilling and a bolt-on assembly easily installed between the vehicle's frame and axle. The double bellow design provides brute strength capable of handling big loads with full-time load support up to 5,000 pounds, improving safety and ride quality.

LoadLifter 5000 is Air Lift's toughest line of adjustable air helper springs. They are built like a tire with reinforced 2-ply fabric rubber bellows and ultra high strength Zytel® nylon end caps.

This new LoadLifter 5000 air spring suspension kit—part No. 57347—is available for immediate purchase. The kit comes standard with a limited lifetime warranty featuring no mileage restriction.

- END -

New lifetime warranty for Air Lift air springs!

Full Warranty Literature (230k pdf)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

iso_9001 LANSING, MI •Nov. 1, 2007 — Effective immediately, Air Lift is pleased to offer a limited lifetime warranty for all Air Lift 1000, RideControl, SlamAir, and LoadLifter 5000 air springs. No other air spring manufacturer offers this calibre of warranty to its customers. The best warranty in the business — Air Lift guarantees these air spring systems will be free from defects in workmanship or materials for the lifetime of the vehicle of original installation with no mileage restriction.

As an added benefit, this new lifetime warranty applies retroactively to air springs purchased on or after Sept. 1, 2007. For more detail about the warranty, check out the fine print online at http://www.airliftcompany.com/pdf/ AirLift_Warranty.pdf.

- END -

Brand new name, same great product!

LoadLifter 5000 photo (293k JPG)
Contact: Melanie Conran, (800) 248-0892, ext. 234 or melanieconran@airliftcompany.com

LoadLift 5000 LANSING, MI • Oct. 25, 2007 — Effective immediately, as part of the updating and evolution of the Air Lift corporate image, our SuperDuty air spring will now be called LoadLifter 5000. Air Lift Company feels that this name better emphasizes the benefit and strengths of the product line.

It is expected that it will take a few months to get all our marketing pieces replaced and updated to reflect this change. We appreciate your patience during this period of transition.

If you have any questions or concerns about this change, please let us know.

- END -

New Digital Crafter Packages Available from EasyStreet

Press Release PDF (161K PDF) | Product Photo (262k JPG)
Contact: Corey Rosser, (800) 248-0892, ext. 227 or coreyrosser@airliftcompany.com

Slam_air_75595 LANSING, MI •Oct. 23, 2007 — Air Lift Company and EasyStreet announced today the release of three new digital crafter packages featuring the new Dominator series air springs and the AutoPilot digital control system. The crafter packages include four air springs, a complete AutoPilot digital control system, and air fittings.

Four Dominator series D2500 air springs in one crafter package (part No. 77910) provide the ultimate in air spring performance with more lift, higher pressure, a softer ride, a maximum 600 PSI restrained, and a 7.7" stroke. Combined with the AutoPilot digital control system, this is the most competitively priced system in the industry.

The AutoPilot digital control system is an advanced, accurate and easy to use digital air management system, controlling air suspension needs at the touch of a button. With plug and play harness wiring, digital leak detection, and one touch ride control, no other system compares. An analog control system is also available.

The digital crafter packages (part Nos. 77910, 77911, 77912) are available for immediate sale and are now offered at a discounted price - call for details.

EasyStreet is a division of Air Lift Company featuring air suspension solutions for hot rods, sport compacts, sport trucks, custom cars and other lowered performance vehicles. Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. For more information, contact EasyStreet by calling (800) 248-0892, or on the Web at http://www.easystreetair.com/.

- END -

New Upper Mount for Popular EasyStreet Kit

Press Release PDF (157K PDF) | Product Photo (285k JPG)
Contact: Corey Rosser, (800) 248-0892, ext. 227 or coreyrosser@airliftcompany.com

Slam_air_75595 LANSING, MI •Oct. 15, 2007 — Air Lift Company and EasyStreet announced today the release of their Generation II upper mount for the air spring kit fitting the Dodge Charger, Magnum and Chrysler 300.

EasyStreet’s exclusive Generation II upper mount is patent pending and features a dual path rubber isolator. This isolator aids in separating the shock absorber loads from the air spring loads, improving ride quality. The new design also incorporates a low profile jounce bumper which increases the suspension travel range. An upgrade kit is available for those who have purchased an earlier version (Generation I) of this kit.

This new EasyStreet air spring suspension kit (part No. 75595) as well as the Generation I upgrade kit (part No. 50510) are available for immediate purchase.

To experience the best in air suspension, combine the new kits with the AutoPilot Digital Control System — which may be purchased separately (part No. 27630) or as a combo kit (part No. 95752). The EasyStreet AutoPilot Digital Control System is the most advanced, easy to use and accurate system which controls your air suspension system at the touch of a button!

- END -

Air Lift Joins 2,000 Companies at Automotive Trade Show

Press Release PDF (157K PDF) | Location Map (658K PDF)
Contact: Aaron Lundy, (800) 248-0892, ext. 249 or alundy@airliftcompany.com

Sema_logo LANSING, MI • September 28, 2007 — Air Lift Company of Lansing will be among the more than 2,000 manufacturers showcasing new and innovative products at the upcoming Specialty Equipment Market Association (SEMA) Show in Las Vegas, Nevada, October 30 - November 2, 2007. Air Lift Company has participated in the SEMA show since its inception in 1963. Visit Air Lift at booth 23035.

The show is the only one of its kind, featuring thousands of products that make it possible for drivers to personalize and enhance their vehicle's appearance, performance, comfort, convenience, safety and fun.

"The SEMA Show is premier automotive trade show in the world," said Aaron Lundy, Marketing Manager. "We're excited to be exhibiting at the event."

"The SEMA Show is the only place in the world where professionals from the entire automotive specialty-equipment industry come together," said Peter MacGillivray, SEMA VP of events and communications. "Featuring more than 2,000 manufacturers, the SEMA Show is where buyers, retailer, distributors and media come to see what the hot, new automotive products are."

Air Lift Company will be showcasing their new Wireless AIR (Advanced Integrated Remote). This innovative breakthrough is the latest thing in on board air control for air springs. The Wireless AIR features the easiest installation ever with no wires and no air lines to the cab. Just clip the control unit to your visor like a garage door opener - it's about the same size. The exclusive wireless unit works in or outside the vehicle allowing the user freedom to make adjustments in full view of the vehicle. This compact, battery-powered unit features advanced integrated diagnostic capabilities for increased safety and peace of mind. Two user-defined memory buttons are provided for frequently used settings. As an added safety measure, minimum air pressures are automatically maintained.

SEMA is a trade association representing the automotive specialty equipment industry. Its members consists of companies that manufacturer, sell, distribute, install or market products that increase the appearance, performance, comfort, convenience and safety of a vehicle. For more information about SEMA, visit www.sema.org.

- END -

New Air Lift Load Support Kit for Lowered Trucks

Press Release PDF (157K PDF) | Product Photo (285k JPG) New Product Release PDF (658K PDF)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

iso_9001 LANSING, MI •Jul.12, 2007 — Air Lift Company announced today the release of a new SlamAir air spring kit for lowered 2002-2007 Dodge 1500 two wheel drive models.

This SlamAir kit is designed for trucks which have been lowered four to six inches with a shackle, leaf spring or flipped axle drop. This kit comes with Air Lift's exclusive alignment tool and installs in one to three hours, depending on how the truck was lowered.

SlamAir kits supplement a lowered truck's leaf springs providing adjustable spring rate for ride comfort, safety and variable loads. The kits come standard with a two-year, no mileage restriction, limited warranty. For the ultimate in air suspension performance, add an on board air compressor system and upgrade your air springs to a limited lifetime warranty.

This new SlamAir air spring kit-part No. 59113-is available for immediate purchase.

The release of this new kit for lowered trucks marks a renewal of Air Lift's commitment to meeting the needs of a diverse truck market. This is just the first of many new load support and performance suspension products in development for vehicles that are lifted, lowered and everything in between! Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. For more information, contact Air Lift Company by calling (800) 248-0892, or on the Web at http://www.airliftcompany.com/.

- END -

Air Lift ships new, improved box!

Air Lift box flyer (100K PDF) New Box Photos: Photo1 (104K jpg) | Photo2 (104K jpg)
Contact: Melanie Conran, (800) 248-0892, ext. 234 or melanieconran@airliftcompany.com

New_Box LANSING, MI •Aug. 21, 2007 — Effective immediately, Air Lift 57000 and 59500 series air helper spring kits are shipping in a new box. The new box features the following updates:

Attractive, updated graphics designed to emphasize the benefit and value of adjustable air helper springs
Strengthened upsell message for control system accessory
Increased "dead" space incorporated into the design to accommodate customer labeling needs
Size and stock adjustments to improve shipping integrity

If you have any questions or concerns about the updated packaging please let us know.

- END -

New LoadLifter 5000 Kit Released for Toyota Tundra

Press Release PDF (139K PDF) | Product Photo (466k JPG) New Product Release PDF (558K PDF)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

iso_9001 LANSING, MI •Jul.12, 2007 — Air Lift Company announced today the release of a new LoadLifter 5000 air spring suspension kit for the 2007 Toyota Tundra, two-and four-wheel- drive models. This kit is one of Air Lift's many no-drill applications featuring a bolt-on assembly easily installed between the vehicle's frame and factory leaf springs. The single bellow design provides brute strength capable of handling big loads with full-time load support up to 3,000 pounds, improving safety and ride quality.

LoadLifter 5000 is Air Lift's toughest line of adjustable air helper springs. They are built like a tire with reinforced 2-ply fabric rubber bellows and ultra high strength Zytel® nylon end caps. The kits come standard with a two-year, no mileage restriction, limited warranty. For the ultimate in air suspension performance, add an on board air compressor system and upgrade your air springs to a limited lifetime warranty. This new LoadLifter 5000 air spring suspension kit-part No. 57299-is available for immediate purchase.

- END -

Air Lift Achieves ISO 9001:2000 Certification

Press Release PDF (100K PDF)

Contact: Kevin Mehigh, (800) 248-0892, ext. 222 or kevinmehigh@airliftcompany.com Dale Ward, (800) 248-0892, ext. 224 or daleward@airliftcompany.com

iso_9001 LANSING, MI • Feb. 02, 2007 — Air Lift Company announced today their successful ISO 9001:2000 quality management system certifi cation. Air Lift was officially granted certification on February 12, 2007.

ISO 9001:2000 applies to organizations which follow a quality management system which includes several standards. The standards include procedures for all processes of the business - from employee training and customer service to product development and production.

"Due to seeking the ISO 9001:2000 certifi cation, Air Lift has recognized numerous quality benefi ts which have already begun to positively impact our customers," stated Kevin Mehigh, Air Lift Company Vice President. "It was a great experience and ISO 9001:2000 has become a major building block for our organization in order to support future growth."

Air Lift Company began the ISO certification process in December of 2005, working with a local quality consultant from the Business & Community Institute. A quality system was devised and implemented and training was conducted at all levels of the organization. Air Lift Company is committed to fulfilling the requirements of their quality.

Air Lift Company is committed to fulfi lling the requirements of their quality management system: to develop, manufacture and continuously improve the highest quality products that fit, work and last. Their goal is to consistently provide products and services that meet or exceed the requirements and expectations of their customers.

- END -

Air Lift Announces Release of New RideControl Air Suspension Kit

Press Release PDF (129 PDF) | Product Photo (2MB JPG) New Product Release PDF United States (92K PDF) | Canada (193K PDF)
Contact: Mike Morgan, (800) 248-0892, ext. 265 or mikemorgan@airliftcompany.com

59565 LANSING, MI • Dec. 15, 2006 — Air Lift Company announced today the release of a new RideControl air suspension kit for the 2007 Chevrolet Silverado 1500 and GMC Sierra 1500 pickup trucks. This kit is designed for the 2007 Chevrolet Silverado 1500 and GMC Sierra 1500 and fits the two wheel drive and four wheel drive new body GMT 900 chassis with bed lengths of 68.4 or 78 inches.

This new RideControl load-assist air suspension kit was designed to install easily between the vehicle frame and the rear leaf spring suspension. The kit bolts on, utilizing existing factory holes — no drilling is required! There is also no need to remove the factory bump stop and the RideControl single sleeve design provides optimal load support and ride quality for ½ ton pickups. All RideControl kits level the vehicle and improve handling while carrying a load or towing. The included air springs are adjustable from 10 to 100 psi and offer up to 2,000 pounds of load-leveling capacity.

This RideControl kit comes standard with a two-year, no mileage restriction, limited warranty. For the ultimate in air suspension performance, add an on board air compressor system and upgrade your air springs to a limited lifetime warranty.

The RideControl air spring suspension kit (part No. 59565) is available for immediate purchase.

- END -

Air Lift Announces New PowerPack System

All-in-one air management system for commercial vehicles

Press Release PDF (151k PDF) | Product Photo (449K JPG) New Product Release PDF United States (500K PDF) | Canada (500k PDF)
Contact: Andy James, (800) 248-0892, ext. 250 or andyjames@airliftcompany.com powerpack

LANSING, MI • Dec. 15, 2006 — Air Lift Company announced today the release of the new PowerPack air management system. The pre-assembled PowerPack system was designed to accompany air suspension kits for vehicles that require two paths of air spring control ― side-to-side or front-to-rear. It is sold separately from the package and will work on any vehicle that requires two paths of air spring control.

The PowerPack air management system is intended for commercial vehicles that require a kneeling function and flat bed accessibility ― such as ambulances, motorhomes and catering vehicles. The system is completely automatic, requiring no manual adjustments, regardless of the load carried.

The PowerPack system integrates a tank, compressor, manifold and SmartAir electronic height control into one unit with an easy plug-and-play install. The SmartAir electronic height control, offered exclusively by Air Lift, increases product life by decreasing compressor run time and moving parts. The integrated valve manifold reduces air line connections by 75 percent from the previous Air Lift system, reducing the number of leakage points and simplifying assembly. Twin compressors reduce air tank fill time and provide redundancy.

The PowerPack air management system (part No. 25454) is available for immediate purchase. Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. For more information, contact Air Lift Company by calling (800) 248-0892, or on the Web at http://www.airliftcompany.com/.

- END -

Air Lift Announces the Release of New Air Spring Suspension Kit

New spring beam design for commercial vehicles

Press Release PDF (134k PDF) | Product Photo (1.29MB JPG) New Product Release PDF United States (410K PDF) | Canada (410K PDF)
Contact: Andy James, (800) 248-0892, ext. 250 or andyjames@airliftcompany.com kit

LANSING, MI • Dec. 15, 2006 — Air Lift Company announced today the release of a new air spring suspension kit for the 2001-07 Chevrolet/GMC C-3500 commercial chassis.

This air spring suspension kit features a new spring beam design and is now accompanied by the PowerPack air management system. Compared to the stock suspension, the kit enhances the vehicle’s ride quality, provides roll stability, improves handling when loaded or unloaded and provides the ability to fully kneel the rear of the vehicle. Ride quality is improved over rough roads and over transitions such as driveways and ramps. Braking and acceleration lift and dive are minimized and pinion angle change is reduced.

The kit’s spring beam and panhard rod assembly, exclusive to Air Lift, is the only assembly currently available which is virtually maintenance-free. The sealed cross-axis joint of the panhard rod replaces Air Lift’s previous greasable Heim joint. The spring beam is a single piece of forged steel that is made to outlast the vehicle and is produced by a world-class North American manufacturer who supplies similar components to both the U.S. military and original equipment manufacturers (OEMs).

The air spring suspension kit (part No. 39206) is available for immediate purchase. Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. For more information, contact Air Lift Company by calling (800) 248-0892, or on the Web at http://www.airliftcompany.com/ .

- END -

Air Lift and EasyStreet Announce the Release of New Air Spring Suspension Kits

2006-07 Dodge Charger, 2004-07 Chrysler 300C and 2004-07 Dodge Magnum kits now available

Press Release PDF (100k PDF) | Kit Photo (910K JPG)
Contact: Corey Rosser, (800) 248-0892, ext. 227 or coreyrosser@airliftcompany.com charger_kit_small

LANSING, MI • Oct. 17, 2006 — Air Lift Company and EasyStreet announced today the release of new air spring suspension kits for the 2006-07 Dodge Charger, 2004-07 Chrysler 300C and 2004-07 Dodge Magnum. The new kits will fit both standard and SRT 8 models.

EasyStreet kits maintain stock handling and maneuvering while gaining the appeal of a lowered vehicle. The kits are 100 percent bolt-on — no cutting or welding required — allowing for an easy installation.

Both front and rear kits are available for each model. EasyStreet is first to offer full replacement air struts for the front kits only. The front kit features a 5 ½” drop from stock height and 9-way adjustable struts. The rear kit features a 6” drop from stock height, and is ½” ported for maximum air flow providing quick raising and lowering action.

Front (part No. 75595) and rear (part No. 75695) air spring kits are available for immediate purchase.

EasyStreet is a division of Air Lift Company featuring air suspension solutions for hot rods, sport compacts, sport trucks, custom cars and other lowered performance vehicles. Air Lift Company is the premier global supplier and manufacturer of aftermarket air suspension products. For more information, contact EasyStreet by calling (800) 248-0892, or on the Web at http://www.easystreetair.com/.

- END -