|
Air
Springs
Fittings
Compressors
Tanks
Gauges
Air Line
Switches
Valves
SlamAir Shock
Dryer
Custom
Air Springs
|
 |
| This
automatic leveling system uses a position sensor along with
an ECU to maintain a preset vehicle ride height. |
 |
| The
system is comprised of a magnetic height sensor/ECU, a bracket
mounted magnet, solenoid valve, relay, air compressor, and an
interconnecting wire harness. This sytem is combined with the
previously installed air bags.
The height sensor/ECU is mounted to
the vehicle frame and the magnet is mounted to the axle or
leaf spring. When load is added to the vehicle, the magnet
rises above the ECU centerline (as the suspension is compressed).
If the magnet maintains this position for a minimum of 25
seconds, the ECU will turn on the compressor via the relay
adding air to the air bags. Air is added until the magnet
is re-centered, restoring the vehicle to its preset ride height.
When load is removed from the vehicle,
the magnet falls below the ECU and energizes the solenoid
valve. This allows the air to escape from the air bags until
the magnet is re-centered and the reduction in load is accomodated.
An optional kneeling system can be
purchased which includes a dash mounted rocker switch. This
system works to manually exhaust air from the bags when a
lower vehicle is needed while parked.
|
| |
|
